Deltacam.com
http://deltacam.com/forum/

20/22r performance
http://deltacam.com/forum/viewtopic.php?f=37&t=112
Page 1 of 1

Author:  White Trash [ Tue Jan 25, 2011 8:09 am ]
Post subject:  20/22r performance

I figure it is easy enough for me to ask here considering no one is going to answer your phone at midnight. :lol:




I'm working with a 20/22r hybrid and I need a silly cam. 45DCOE side draft weber, large tube 4 to 1 header mild port work etc. What I'm looking for is something with a power band in the 2500-6000 rpm range. Do you offer valve springs? I can get them from the outfit I'm getting the rest of the engine kit from (engnbldr) if you do not.

I have good clean 20r, 22r and 22re cams at my disposal which would be a better core for you? Honestly I have no use for any of them so you can have all of them, one for core charge and the others for free if you like. :mrgreen:

Author:  admin [ Tue Jan 25, 2011 4:39 pm ]
Post subject:  Re: 20/22r performance

White Trash wrote:
I figure it is easy enough for me to ask here considering no one is going to answer your phone at midnight. :lol:




I'm working with a 20/22r hybrid and I need a silly cam. 45DCOE side draft weber, large tube 4 to 1 header mild port work etc. What I'm looking for is something with a power band in the 2500-6000 rpm range. Do you offer valve springs? I can get them from the outfit I'm getting the rest of the engine kit from (engnbldr) if you do not.

I have good clean 20r, 22r and 22re cams at my disposal which would be a better core for you? Honestly I have no use for any of them so you can have all of them, one for core charge and the others for free if you like. :mrgreen:


The grind is $55.00 but will take some off for the additional cam cores you send in, a matched set of dual springs is $50.00
either core is good for the exchange. the 292 grind will work great for your build.

Internet OPEN 24/7

Author:  White Trash [ Tue Jan 25, 2011 5:31 pm ]
Post subject:  Re: 20/22r performance

Beautiful. I'd like to pick up a set of rockers as well. My current set is a bit rough and I'd like to make the cam last as long as possible of course. :mrgreen:


I'll be in touch to order everything in the next couple weeks, I'm still amassing my parts list.

Author:  White Trash [ Sat Jul 21, 2012 12:44 am ]
Post subject:  Re: 20/22r performance

A year and a half later life is clearing up enough I can finally put something together. :D



As an addition to my ancient list I'll need rocker arms too. Also is there a basic price schedule for head work? I can do the basic port matching, mild porting etc myself but honestly I'd be better off leaving that up to the pro's.

What my end plan involves is oversized valves, dual springs, a cam that is marginal for street usage at best and a good port job. This would be going into a 20r head. What would I be looking at as a bottom line? Thank you in advance for your time, I look forward to doing business with you this summer.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/