HOME | CAMSHAFT GRINDING | SERVICES | TECH AREA | FORUM

Phone: (800) 562-5500
2366 Tacoma AVE S.
Tacoma, WA 98402
sales@deltacam.com

  Post grinding quality control

 Camshaft Grinding Process

This process is performed on every camshaft that we produce. The camshafts are checked for straightness to verify that they didn't bend during the grinding process. After they are straightened to less than 1/2 thousandths on the main bearing areas, each lobe is checked to ensure they are within tolerances for "run-out". If it not within tolerance, it is rejected and returned back to the grinder to be reworked. After every lobe is checked and has passed inspection, the mains are taped with protective wrap in preparation for the Parco surface treatment.

1. Placing an order
2. Product Cleaning
3. Grinding your custom camshaft?
4. Pre grinding process
5. Post grinding quality control
6. Surface treatment process
7. Micro polishing main bearing areas
8. Protective lubrication and packaging